Check headlight housing I had the same problem. On the top of the headlight housing are three (3) screws; two for headlight adjustment and one (1) on each respective corners (far left and far right) are for housing adjustment. If you tighten the these corner ones they will tighten to the body. After that you will have to adjust the headlight aim using the other screws. Hope this helps. Quote: Originally Posted by dguzzardo22 I bought new 92-98 2 dr black background clear corners and they leave a little gap between the fender and the corner please help it looks bad. thanks | __________________ It's always a great day to be underwater and play with the fish.....preserve our oceans and reefs" Fariz 1997 318ti, Hellrot (Bright Red), Dinan Stage 2 Chip 16x7 OEM sport Wheels/X-Brace/Custom Strut Brace/Cold Air Intake/M-Tec Steering Wheel/Koni Adjustable FrontShocks/ Bilstein Sport Rear Shocks /H&R Sport Springs/Custom fabricated strut tower brace/Rear Strut brace, Stromung Exhaust Future Mods: E46 17" wheels or Kosei K-1 17x8.5s |