I WANT WARM WEATHER!!! Car has sat for winter due to the atrocious Michigan roads. 40 miles put on since the swap. Been stocking a bunch of parts for preventative maintenance and to get it done. Parts to install when it's not 6F outside Siemens/VDO Pump Vaico strut mounts (Don't need but I'm taking e90 hats off for stock e36. Cheap enough) E36 Spring perch OE Spring Pad Elring strut gasket OE Strut reinforcement place (Thanks BlueBimma) Febi flex disc Rein center support bearing Vaico driveshaft centering bushing UUC 27MM Swaybar Febi rear wheel bearings FAG front wheel bearings Bosch FPR Full rear brakes, soft/hard lines if need be, rotors, pads, calipers FEQ E30 6cyl halfshafts The plan is to have any real wear item be replaced within the last 20K/original swap timeframe. This includes bushings, hoses, fluids and things that could leave me stranded. I am going to be having it looked over by a shop since the pros can see what I can't. Replace any hard/soft fuels lines if needed. Need warm weather to paint too. I want to get back to driving it as that's what I like it for. It sure isn't a garage queen. |