Quote:
Originally Posted by wodcutr So you only have the x20 connection made from the engine harness and the only code you get from the dme is the evap valve? You made no wire changes? |
wodcutr, Sorry I missed this question but yes, no changes and it started and ran.
I got the EVAP CEL figured out using the info above and thought I had the connections right to make the stage 1 auxiliary fan work but when I tested it by shorting each side of the dual temp sensor to ground, still had no stage 1 function (stage 2 worked from the start, same circuit path)
I'll figure the stage 1 fan out at some point but it is low on the list for now.