Just replaced my regulator. I checked out the rails as I was having a hard time getting the window to rest in them. Ultimately I got them in, but the adjuster arm had a helluva time getting aligned to where I could bolt it to the door. I had to use some muscle to push the adjuster arm far enough down to bolt it up, suggesting the front of the window did not want to level out (go up) as I pushed the adjuster arm down. I'm not sure why, it might be that the regulator itself is misaligned as the areas where the rivets were drilled out and bolts put in got beat up a little. Either way, the window works now BUT I hear the motor struggling when its pushing the window up once the window is about 1/2 to 2/3 up. It's meeting resistance there and Ill likely have to figure out what the problem is before I tear up another regulator. |