Thanks a lot for your help!
It's stock 5 speed manual transmission.
All of those codes and Live Data have been going on consistently the same, at every scanning process using CarSoft 6.5
I reset the CEL so many times, and also erase the "adaptation value". But those exact same codes are always coming back after a few miles of driving.
What is DTC? Is it the same as ASC+T ( Electronic Traction System) ?
Did you mean that sensor or the DTC or ASC+T throttle flapper is randomly stuck closed ? Thus prompts the rapid strobe of CEL plus misfire, cutting out?
If so, would it eliminate the misfire and cutting out issues by deleting / bypassing the ASC+T throttle/flapper body all together? |