I just swapped in a Z3 2.8 aluminum block M52 with the matching ZF 5 speed. I also installed the whole rear sub-frame assembly from the Z3 with the larger 3.15 dif. I used the Z3 front shaft along with rear shaft from an E36 325is for the front with no extra modding needed. It was a perfect fit. I got so many usable parts off the Z3 donor. Good luck.
Quote:
Originally Posted by PrimeTimeSlime  Hey guys, been reading a lot about the LSD swap and I just want to verify one thing.
Swapping a 2.8 m52 and zf transmission this week. While I am at it, I am swapping a 3.73lsd from an e30 325is into my ti.
I plan to take the 318ti output flanges and put them in the e30 diff, then use the 318ti half shafts. Sounds simple enough, will it work?
Thanks |