Quote:
Originally Posted by Dipperd Great write up - very helpful and has *almost* solved my problem. The issue i have is that the window (RHD - drivers side) goes up and down ok now but about half an inch from being fully up, it tilts forward which means that the rear of the window is out of the frame so that there is a gap of about 3 mm. Anyone know how to sort that? Thanks |
You can remove the rear guide completely. There's a rubber plug towards the bottom of the door which when removed will aloow access to a 10mm bolt. Remove the bolt and the guide slides out. From there, you can inspect the guide, glue in the felt lining etc. When you reinstall it, IIRC, there's a hook or bracket that secures it on the top end, make sure it engages, then replace the lower bolt.