318ti.org forum - View Single Post

pdxmotorhead · 02-03-2009, 08:59 AM

Just another note, I usually spend less than a 100 bucks for coating a header, any powdercoating shop can shoot the high temp ceramic powder.

The worst is when you get an oil leak and it runs on the wrap material for a while. Then takes like 10 races to burn off...

Keep us posted on the header wrap, if yours works out I'll try it at the track next time someone has to have it... Where did you get the spray coating?

Dave

02-03-2009, 08:59 AM	#351
pdxmotorhead Senior Member Join Date: Mar 2005 Location: Portland Or Posts: 2,666 iTrader: (1) Photo Gallery	Just another note, I usually spend less than a 100 bucks for coating a header, any powdercoating shop can shoot the high temp ceramic powder. The worst is when you get an oil leak and it runs on the wrap material for a while. Then takes like 10 races to burn off... Keep us posted on the header wrap, if yours works out I'll try it at the track next time someone has to have it... Where did you get the spray coating? Dave __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black