318ti.org forum - View Single Post

HoJo · 10-13-2008, 03:30 AM

I'm sure you've figured something out by now, but I figured I would post just in case anybody else has the same question.

To remove the hatch, without cutting the hinges, remove the plastic interior trim at the top of the hatch. There are two cutouts on the glass side that let you get to the back side of the hinge. There are two 10mm nuts on each hinge that will separate the hatch from the hinge.

10-13-2008, 03:30 AM	#3
HoJo Junior Member Join Date: Jun 2003 Location: Overland Park, KS, USA Posts: 14 iTrader: (0) Photo Gallery	I'm sure you've figured something out by now, but I figured I would post just in case anybody else has the same question. To remove the hatch, without cutting the hinges, remove the plastic interior trim at the top of the hatch. There are two cutouts on the glass side that let you get to the back side of the hinge. There are two 10mm nuts on each hinge that will separate the hatch from the hinge. __________________ 95 Base 95 Clubsport