Quote:
Originally Posted by Philly I believe Ti's use the same type of ABS setup... I had 2 sensors in the rear (1 on both wheels) - Ive never even looked at the front though. If your swapping to the ZF tranny, you may have problems with shift linkage lining up 100%.. may need to swap those out of the donor too... but it sounds like your more than ambitious and intuitive, so im sure you'll be fine |
It is possible that your car has the 4 channel setup already... They switched sometime during the later E36's... Probably late 97 or late 98..
You still have a connection from the ABS pump to each brake line, but there is only one speed sensor in the back. I think on mine it is on the passenger side, not the driver side rear..