crank position sensor was going to be my first guess as well - since I had the same problem - & replacing the sensor helped/fixed the problem - but in my case it DID throw the code 'crank position sensor'...
maybe you wanna change the cam & the crank position sensors just in case - they are not too expensive but it will eliminate a lot of guessing.
I'm still voting for the MAF issue, though...
good luck.
Quote:
Originally Posted by 318racer i think its your crankshaft position sensor.on RealOEM it is listed as "pulse generator - crankshaft". Any shop you go to would refer to it as a crank position sensor. Here it is on RealOEM: http://www.realoem.com/bmw/showparts...58&hg=11&fg=10 It's #14 on that illustration. Part #12141247622 my friends car had what seems to be the same problem and it got fixed. just a suggestion im no mechanic though... hope it helps |