318ti.org forum - View Single Post

**cooljess76** · 01-30-2008, 11:28 PM

Excellent writeup Dusten. I'll be doing this when I have my engine out here in a couple weeks. My car came from Michigan, but it's not quite as bad as yours was. I'm getting a little shake while turning left at speed. I'll probably replace the ball joints and LCABs while I'm at it. Then once the motors back in, I'll take it in for an alignment.

Did you have any problems aligning the new brackets in the exact location as the old ones?

01-30-2008, 11:28 PM	#12
cooljess76 NOBODY F's with the Jesus Join Date: Oct 2006 Location: Ventura California Posts: 7,824 iTrader: (6) Photo Gallery	Excellent writeup Dusten. I'll be doing this when I have my engine out here in a couple weeks. My car came from Michigan, but it's not quite as bad as yours was. I'm getting a little shake while turning left at speed. I'll probably replace the ball joints and LCABs while I'm at it. Then once the motors back in, I'll take it in for an alignment. Did you have any problems aligning the new brackets in the exact location as the old ones? __________________ 4 MORE YEARS BABY!!!