Hope some one can help.
While driving my car I noticed a loud chirping sound from the rear of the car, at first could not find it, today it sounded louder and I decided to do some research. I believe that my sqeaks are comming from the rear DRIVER SIDE shock mount. Can any one tell me how to access these thru hatch?
I cant seem to find an access point in the hatch area and dont want to rip any of the covers on the sides.
I also hope that this fix will also address the tire rub I have on that side. I am also going to add rear spring pads 15mm in the hopes that with a full car I wont have any tire rub. has any body done this and is it easy to do?
Any special tools required?
This is what I plan on getting any advice?
Rogue Engineering 3 Series Rear Shock Mounts:
http://store.bimmerworld.com/shared/...unt2=101447701 Rear Spring Pads:
http://store.bimmerworld.com/shared/...unt2=101447701 any advice on better or less expensive products appreciated.
But My main desire is for some one to tell me how to take those Carpeted side panels off so I can get at the shock mounts.
thanks,
ACE