I know it's too late, but you guys all worked harder than you should've. My pump housing broke when I tried using the extracting holes, so I grabbed the pump body with a pair of channel lock pliers and with a couple sharp twists, the pump slid right out. Took 30 seconds. I wouldn't advise threading anything into or prying against your block. It can crack just as easily as your water pump did. I wouldn't hammer on it either, it's designed to slide straight in and out. If you knock it crooked, you're putting a lot of stress on the block. Edit; BTW, YOU'RE ALL FIRED!!! __________________ 4 MORE YEARS BABY!!! |