Something doesn't add up. If my sensor doesn't go where I put it, what heats the fluid?
My passenger brake duct already had a sensor, for the so called "winter package".
The fluid would have to be heated from the bottom of the reservoir, to be sure the fluid warms up, regardless of the level in the reservoir. That is unless it heats it in the tube, as it comes up from the reservoir.
I saw a diagram that showed the bracket/heater element, mounting on the side of the reservoir.
Quote:
Originally Posted by cali-ti if anyone else is doing this mod, let me know and i can send you the bmw doc covering the install. that thermo switch gets installed into the brake duct (you drill a hole if one is not already present). |