The Official Dyno Chart *Thread*
 

OK, Boyz and girls lets see what you got.

Post 'em Up.

-Chad

99' 318 TI with a DASC
 

'99 TI Stock
http://www.318ti.org/gallery/showpho...cat=500&page=1

'99 318TI w/ DASC Stock
http://www.318ti.org/gallery/showphoto.php?photo=484

'95 318IS w/ DASC & crazy mods
http://www.318ti.org/gallery/showpho...cat=500&page=1

Stock chart

This was the last one I took a while ago.

http://www.racingtechnics.com/ESC/RAiMA/Dyno-web.JPG

http://www.racingtechnics.com/ESC/RAiMA/dyno.gif

Lisa's dyno run. NickG's Stage 3 software and 10psi pulley. Very impressive.

The first run is stock (190), the second one is with software and pulley (200).

http://www.understeer.com/images/318ti/318ti_dyno.jpg

The 6 cylinder graph:

Do you guys know what software version was running? I know DynoJet used to overshoot (show higher than actual), but the new software is supposed to be pretty spot on.

if Lisa's chart is accurate, that looks pretty decent and i'm looking forward to stage three with a 10psi pulley! :)

we could approach him about a group buy and find out what #s we need for what kind of a discount (if he'll do it at all). any idea what the single unit cost is for stage 3?

Both the before and after dynos of my wife's 318ti were on the same Dynojet. They're running WinPep7 now, not sure what they had before.

Hey , do you have anymore info on your car , i would like to know which year motor you are running , what tuning softwere and what gear ratio and clutch you are using . My 95 318is ran mid 13s with front mounted T3/T4 and my cars gutted with complete M3 undercarrige and no tuning just bigger FP and FPR.

332Tti
 

Here's the chart from my boyfriend's car. This was done this past Saturday on it's first tuning session, with *low* 8-9lbs boost. It's an s52 swap, obd1 conversion, & turbo'ed.

We're gonna fix a couple bugs and hopefully do some more fine tuning in the near future, and turn up the boost some.

http://i57.photobucket.com/albums/g2...v/winpepsm.jpg

Holy crap post pics of the car!

Here's a pic of the twins. The turbo is the one on the trailer. Mine 332ti is on the ground, wearing winter wheels.

http://i57.photobucket.com/albums/g210/vdublv/Twins.jpg

The engine was a M44 bottom end, forge pistons with the M42 head with M3 solid lifters. It had a custom delco ecu. The clutch was from a BMW clutch suited for the 6 cylinder cars.

Currently getting a M52 2.8L rebuilt with forgies and putting on a GT3071R.