PARTS: Strut Bars Front Strut Bars: sparco (potential small clearance issue with battery box lid on passenger's side) http://www.udm-motorsport.com/parts/...suspension.htm Rear Strut Bars: Strong Strut Butt Strut http://www.strong-strut.com/Butt-Strut.htm post additions for the article and they'll get added to this post. |
5 Attachment(s) --4 Cylinder-- Hartge (Solid\Aluminum\$280) www.auto-mark.com BMP Design (Solid\Aluminum\$225) Sparco 03688CPE (Solid\Steel\$100) www.udm-motorsport.com Attachment 1510 Cosmo Racing (Hinged\Aluminum\$125) Attachment 1511 OMP Racing MA1745 (Hinged\Aluminum\$145) Attachment 1512 Racing Dynamics (Hinged\Aluminum\$229) Attachment 1513 Wiechers Sport (Hinged\Aluminum\$199) www.auto-mark.com Attachment 1514 |
4 Attachment(s) --6 Cylinder-- Hartge (Solid\Aluminum\$280?) www.auto-mark.com [No Picture] BMP Design (Solid\Aluminum\$180) UUC Motorwerks(Solid\Magnesium\$315-420) Attachment 1515 Cosmo Racing (Hinged\Aluminum\$125) OMP Racing MA1742 (Hinged\Aluminum\$145) Attachment 1516 Racing Dynamics (Hinged\Aluminum\$229) Wiechers Sport (Hinged\Aluminum\$199) www.auto-mark.com Attachment 1517 AC Schnitzer (Hinged\Aluminum\$640) www.bavauto.com Attachment 1518 |
Rear Hatch Struts - Fitting Hi, I just bought a pair of Rear Hatch Struts, the same make as the factory installed ones. Just wondering if it's easy to change these? Is it just as simple as pop off old ones and pop on new ones!?! Morgan |
yes it is use a standard screw driver to remove the clips...snap on the new hatch struts and push the clip in with your thumb...as easy as that. |
Excellent thanks very much! |
what if you have the non bmw ones, that are longer. how do you get them on. |
huh? this thread is for strut tower bars under the hood, not the hatch shocks, lol :lol: on topic, does anyone know how good the Cosmo Racing bar is? I'm thinking of getting one |
I have been thinking about getting it for a while...I can't imagine it being too hard to make a functional strut bar...There aren't too many ways to mess it up... |
Will this fit ti's? http://www.enthusiastauto.com/catalo...ent-p-151.html And is it better than this? http://www.enthusiastauto.com/catalo...ace-p-173.html |
don't look like they'll fit, I think they have to go back towards the firewall to clear to top of the M42/44 |
Dang, thought so. The site looks like it caters more towards e36'ers than specifics. |
Are there any bars designed like the racebrace? |
probably not for a 318 |
From the looks of things it won't fit ti's with 4 cylinders in them because I have an S52 in a crate but it looks like it will sit lower in the engine bay than the 4 banger making fitment of the racebrace possible. I am considering one of these myself. |
All times are GMT +1. The time now is 08:55 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
Tutorial powered by GARS 2.1.8m ©2005-2006