318ti ews 1 into non ews car
 

Pretty much as the title says. Iv got a 318ti with the ews1 box ecu and key transponder. Now the car it is hopefully going in is a 1992 and as far as a can see it doesnt have any sort of ews at all.

Whats my best option for getting this running? Iv googled for hours but to no avail

Thanks in advance

I sell a direct swap plug and play EWS delete chip for this car. $100 . email me at midnight-tuning@rogers.com for more detail's . cheers

I think you can jump 2 pins together to do a EWS delete without buying a chip. Not sure it will work for your car but worth a shot. Check it out.

http://forums.bimmerforums.com/forum...36&postcount=4

Won't work! The only way is EWS delete chip for 1995 motor ;)

just get a engine ecu from 1994 318i and you don't need to worry about the ews.

Not true. one DME uses Wasted spark and one DME uses Coil paks for ignition spark. You must swap the hole harness if you do that.