Started working on a rear diffuser

Awsome to see this continuing forward!

We need a post with pics of the complete build so far! Exterior, Interior, Engine Bay etc!

Also made a rc body to match the wide body going on the car. Its not a ti, but it's the closest thing I could find.

https://youtu.be/hdj2qlRzVSs
Put a hood dump on the car because it was rubbing the lower hose and co workers were egging me on to put it on the 2 step, and one of them filmed it.

I'd go old-school and blow out the passenger side high-beam for an intake rather than cut the hood.

Widebody time!

Looking at the rear, it almost seems the rear bumper cover should be sectioned and widened...

With so little "body" behind the rear wheels, the ti is tricky to do a wide body with.

It's still sitting high in the rear in that picture. May have to remake the rear splitter depending on how it sits once the quarter panel is cut. It can probably drop 3-4in from that picture

Quarters cut and sitting down. Slightly tucking

Roll cage and body kit done

Couple drifting pics

Are you still running drift events with this car?

What rear suspension modifications are you running? I’ve heard about issues with snap oversteer stemming from the trailing arm geometry, wondering if it’s true and if so, what people do to counteract it.