About 1400 for pistons, rods, coatings and a race ballenced to the crank |
Quote:
|
Quote:
Are you running an MM crank or OEM? Sent from my iPhone using Tapatalk |
Quote:
|
Quote:
Wow, a true gentleman and a scholar! Seems like a very expensive trial build though, but of course "expensive" is relative, my expensive might be your cheap haha I've never heard of the M12, sounds incredible though I'll have to look into it more! I encourage more use of the M44 it's overlooked so much. So threads like these are always up lifting to see and hopefully it will encourage more use of the M4x motors and increase the aftermarket as well! So it's a win/win [emoji16] Sent from my iPhone using Tapatalk |
2 Attachment(s) Finished up the oil and intercooler mount today. Waiting on some more parts to continue on with boost piping. Also my late night self control with ebay is not good. I guess i bought next winter's project already. I'll post some pics when it arrives. |
2 Attachment(s) Every time I think I am done with a part, I have that "BUT WAIT!!!" moment. Now i decided to make a skid plate to tie the subframe to the core support brace and frame rails. This is what happens when I'm waiting on parts and have scrap around. |
1 Attachment(s) Preping the block. Hopefully I will have the rotating assembly in this weekend |
1 Attachment(s) Put the last cost of glyptal on, using a radiant space heater to cure it. Its got the block temp up to 135degF. Hopefully I'll put the crank and pistons in tomarrow. |
4 Attachment(s) Got all the covers painted and yes even the rear main plate. |
Looking wicked really excited to see this thing come together! Just curious how much power are trying to achieve? Sent from my iPhone using Tapatalk |
I'm going to keep turning it up until i start breaking stuff. In all honesty, hopefully it will hit 1000hp, or fail spectacularly |
Quote:
Incredible! Looks like you're going to have the most BA M44 to date, you've inspired me to scrap my ITB kit I was about to run and go down the super charger route [emoji38] Sent from my iPhone using Tapatalk |
On my stock engine with the dasc i was running 10psi and 100 shot of nitrous and making sub 13 sec. Passes. And could still out handle m3s on the track. Now im going for something most have never seen otherwise i would of stuck with that setup |
Quote:
Were you running a dry kit or wet? Also have you heard of the GKD supercharger kit? They utilize their own manifold etc. and let you source out an Easton M45 Mini Cooper S super charger. That's the kit I'm going to go with Sent from my iPhone using Tapatalk |
All times are GMT +1. The time now is 12:43 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org