318ti.org forum (http://www.318ti.org/forum/index.php)
-   Engine (http://www.318ti.org/forum/forumdisplay.php?f=28)
-   -   E36 M42 Vs. E30 M42 (http://www.318ti.org/forum/showthread.php?t=30884)

E36Wes 06-22-2010 05:34 AM

E36 M42 Vs. E30 M42
 
Im starting this thread because I am new to the e36/ti. I understand e30's had the m42 engine in them as well. The intake manifold is different on the e36 m42. Is that the only difference??

What Im trying to do is upgrade to the 4 pintle bosch fuel injectors for a smoother ride. Many people have done this to their e30 m42's. I am wondering if it is ok to do this on the m42 in the ti.

(1995 318tis)

AR Black 06-23-2010 08:06 AM

The M42 in the e30 is the same in an e36, the changes are the same.

mohaughn 06-23-2010 08:59 PM

I don't think the E30 M42 has the same type of vacuum system on the injectors that the E36 M42 has.

Not sure if that helps your question, but there are other differences than just the intake.

CirrusSR22 06-23-2010 09:32 PM

RealOEM.com shows all E36 M42 (with builds starting in January 1994) and M44 engines using the same fuel injector part number. Are these four pintles the four little spray holes on the injector tip? If so, the M44 has them and therefore your E36 M42 has them too. :)

http://www.realoem.com/bmw/partxref....ur=&series=E36

E36Wes 07-02-2010 05:53 AM

So I bought fuel injectors before realizing that our injectors have this vacuum system attached to them. Was al ittle pissed but just returned the ones I bought and sent my originals to Witchhunter Performance to get them cleaned and flow tested. Kinda funky never seen injectors like that...but rather cool.


All times are GMT +1. The time now is 06:30 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org