318ti.org forum (http://www.318ti.org/forum/index.php)
-   General Chit Chat (http://www.318ti.org/forum/forumdisplay.php?f=40)
-   -   new engine build. dasc + turbo +2kits nitrous + methanol (http://www.318ti.org/forum/showthread.php?t=42151)

andakn 01-13-2017 01:00 AM

About 1400 for pistons, rods, coatings and a race ballenced to the crank

740isport 01-13-2017 05:41 PM

Quote:

Originally Posted by BlackBMWs (Post 383171)
i'm in line for one or two (three?) if you ever make more. :cool:

+1 I'd probably be in line for 3. :D

slo318TI 01-13-2017 06:39 PM

Quote:

Originally Posted by andakn (Post 383392)
About 1400 for pistons, rods, coatings and a race ballenced to the crank



Are you running an MM crank or OEM?


Sent from my iPhone using Tapatalk

andakn 01-13-2017 07:50 PM

Quote:

Originally Posted by slo318TI (Post 383407)
Are you running an MM crank or OEM?


Sent from my iPhone using Tapatalk

Running my own concoction, so we will see how it works. As a matter of fact, this whole engine is built from specs in my head, and educated guesses. This my just be a trial build for my next one. This is kinda my tribute to the bmw m12 from the 80s that ran 79psi and made 1400 estimated horsepower.

slo318TI 01-13-2017 08:07 PM

Quote:

Originally Posted by andakn (Post 383413)
Running my own concoction, so we will see how it works. As a matter of fact, this whole engine is built from specs in my head, and educated guesses. This my just be a trial build for my next one. This is kinda my tribute to the bmw m12 from the 80s that ran 79psi and made 1400 estimated horsepower.



Wow, a true gentleman and a scholar!
Seems like a very expensive trial build though, but of course "expensive" is relative, my expensive might be your cheap haha
I've never heard of the M12, sounds incredible though I'll have to look into it more!
I encourage more use of the M44 it's overlooked so much. So threads like these are always up lifting to see and hopefully it will encourage more use of the M4x motors and increase the aftermarket as well! So it's a win/win [emoji16]


Sent from my iPhone using Tapatalk

andakn 01-15-2017 09:40 PM

2 Attachment(s)
Finished up the oil and intercooler mount today. Waiting on some more parts to continue on with boost piping. Also my late night self control with ebay is not good. I guess i bought next winter's project already. I'll post some pics when it arrives.

andakn 01-16-2017 04:58 AM

2 Attachment(s)
Every time I think I am done with a part, I have that "BUT WAIT!!!" moment. Now i decided to make a skid plate to tie the subframe to the core support brace and frame rails. This is what happens when I'm waiting on parts and have scrap around.

andakn 01-20-2017 05:43 PM

1 Attachment(s)
Preping the block. Hopefully I will have the rotating assembly in this weekend

andakn 01-22-2017 04:10 AM

1 Attachment(s)
Put the last cost of glyptal on, using a radiant space heater to cure it. Its got the block temp up to 135degF. Hopefully I'll put the crank and pistons in tomarrow.

andakn 01-25-2017 11:03 PM

4 Attachment(s)
Got all the covers painted and yes even the rear main plate.

slo318TI 01-27-2017 07:29 AM

Looking wicked really excited to see this thing come together!
Just curious how much power are trying to achieve?


Sent from my iPhone using Tapatalk

andakn 01-27-2017 04:00 PM

I'm going to keep turning it up until i start breaking stuff. In all honesty, hopefully it will hit 1000hp, or fail spectacularly

slo318TI 01-27-2017 05:17 PM

Quote:

Originally Posted by andakn (Post 383572)
I'm going to keep turning it up until i start breaking stuff. In all honesty, hopefully it will hit 1000hp, or fail spectacularly



Incredible! Looks like you're going to have the most BA M44 to date, you've inspired me to scrap my ITB kit I was about to run and go down the super charger route [emoji38]


Sent from my iPhone using Tapatalk

andakn 01-27-2017 06:21 PM

On my stock engine with the dasc i was running 10psi and 100 shot of nitrous and making sub 13 sec. Passes. And could still out handle m3s on the track. Now im going for something most have never seen otherwise i would of stuck with that setup

slo318TI 01-27-2017 06:28 PM

Quote:

Originally Posted by andakn (Post 383575)
On my stock engine with the dasc i was running 10psi and 100 shot of nitrous and making sub 13 sec. Passes. And could still out handle m3s on the track. Now im going for something most have never seen otherwise i would of stuck with that setup



Were you running a dry kit or wet?
Also have you heard of the GKD supercharger kit? They utilize their own manifold etc. and let you source out an Easton M45 Mini Cooper S super charger. That's the kit I'm going to go with


Sent from my iPhone using Tapatalk


All times are GMT +1. The time now is 07:20 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2020, 318ti.org