318ti.org forum (http://www.318ti.org/forum/index.php)
-   General Chit Chat (http://www.318ti.org/forum/forumdisplay.php?f=40)
-   -   new engine build. dasc + turbo +2kits nitrous + methanol (http://www.318ti.org/forum/showthread.php?t=42151)

baystint 12-16-2016 05:39 AM

Quote:

Originally Posted by andakn (Post 378080)
My two babies

NOICEE

andakn 12-21-2016 05:24 AM

2 Attachment(s)
Started fabing a prototype of the rear plastic water pipe. I made it double oring and to strattle the old oring spot because they all corrode and i wanted it to contact a fresh surface.

andakn 12-23-2016 03:50 AM

2 Attachment(s)
Finished it up. I don't know if ill try to make the other one for the side of the block.

BlackBMWs 12-24-2016 01:18 AM

i'm in line for one or two (three?) if you ever make more. :cool:

andakn 12-24-2016 04:59 PM

I'd like to get this engine done before i would make any to sell, but i may look into having a manufacturer knock out a hundred or so if the price isn't too high. But i have about 6 hours in making this first one. So if i was to make them i would have to cut that time down or do a little more re-design.

slo318TI 12-24-2016 05:09 PM

Quote:

Originally Posted by andakn (Post 383166)
Finished it up. I don't know if ill try to make the other one for the side of the block.



I wonder how well it will flow? It's the same diameter of the OEM one correct?


Sent from my iPhone using Tapatalk

andakn 12-24-2016 07:09 PM

It just supplies the heater core, right now i have an 8an fitting on it witch is a little smaller. But their is enough room to put a 10an fitting in it. For mine im deleting the ports for the heated intake plate because I run downing atlanta superchargers on mine and dont need them. But those could be added too.

andakn 01-01-2017 12:01 AM

2 Attachment(s)
Started making mounts for the oil cooler and intercooler but decided to remake the frame brace and brackets in one peice of 1/4" aluminum. Needs some finishing work but functions well

anassa 01-01-2017 01:43 AM

Keep up the work! Thanks for posting even when no one responds, its good to keep a record of this kind of work! :biggrin:

slo318TI 01-02-2017 08:14 PM

Quote:

Originally Posted by andakn (Post 383270)
Started making mounts for the oil cooler and intercooler but decided to remake the frame brace and brackets in one peice of 1/4" aluminum. Needs some finishing work but functions well



Fantastic work brother! Really coming along! Thanks for keeping us updated I try to reply every time I see the thread has been posted in.


Sent from my iPhone using Tapatalk

baystint 01-03-2017 04:59 AM

Looking Good

3DGE 01-04-2017 07:06 AM

Wow, I need this

99 dakar M3 vert & 97 M-tech ti

baystint 01-09-2017 04:24 AM

Quote:

Originally Posted by jca (Post 383096)
Agreed. Someone needs to fab up some aluminum water pipes and make a fortune on this site!

Good Idea...

andakn 01-12-2017 01:15 AM

1 Attachment(s)
Getting ready to start building the lower end. Pistons are ceramic coat on top and teflon skirts

slo318TI 01-12-2017 11:11 PM

Quote:

Originally Posted by andakn (Post 383381)
Getting ready to start building the lower end. Pistons are ceramic coat on top and teflon skirts



[emoji15] woah!! How much those bad boys run you??


Sent from my iPhone using Tapatalk


All times are GMT +1. The time now is 06:11 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2020, 318ti.org