Need part numbers
 

Evan,
Need help with some part numbers.

1996 328 throttle linkage and any parts that attach to it.

1996 318ti, front and rear wiper blade refills.
1990 325iC, front wiper blade refills

Throttle Cable - part# 35411163228 ----------------------- $25.22
Linkage/shaft - part# 35411159111 ------------------------ $14.50
Retainer Spring - part# 35411159803 ---------------------- $0.82
Bush Bearing - part# 35411100674 ------------------------ $0.64
Bush Bearing Support - part# 35411119016(x2) ------------ $0.52(x2)
Upper Circlip - part# 07129934916 ------------------------ $0.30
Lower Circlip - part# 07119902293 or 07119932863 -------- $0.66 or $0.09(I'd get both just to be safe)
Clutch Pedal Stop Buffer - part# 35311103849 ------------- $0.58
Rubber Grommet - part# 35411152331 --------------------- $0.94

Prices are from Tischer's website, I'm sure Evan could get you a package deal:wink:

realoem diagram:
http://www.realoem.com/bmw/showparts...52&hg=35&fg=10

318ti Rear Blade Refill - part# 61621381754 ------------------------$7.62
318ti Front Blade Refill up to 03/96 part# 61611372747(x2)----$4.40
318ti Front Blade Refill after 03/96 part# 61618220913(x2)----$9.39
*note---> this is according to realoem, I'd check and make sure that your blades aren't different lengths since realoem has them listed as the same part# for both sides.

**Also note that according to realoem, the 1990 325i convertible uses the same blade refill as the 318ti, part# 61611372747(x2)----$4.40

***Again, these were the prices listed on Tischer's website.

Here's the links to the realoem diagrams:
318ti front wipers
http://www.realoem.com/bmw/showparts...69&hg=61&fg=45

318ti rear wiper
http://www.realoem.com/bmw/showparts...99&hg=61&fg=45

'90 325ic wipers
http://www.realoem.com/bmw/showparts...56&hg=61&fg=45

Thanks again.
The bladed are now one size and you cut them down.
I think.

No problem Steven. That makes sense, now that you mention it I seem to recall trimming the refills to fit.

Yes.
I just went by Weatherford BMW in Berkeley, CA and I trimmed the OEM refills to fit.
I thought about getting a set of new wiper arms with rubbers already on them, at Kragen A/P but they don't have the spoiler on the arm.
Cheaper though, in a pinch, and you just snap them on.
:wink: