1 Attachment(s) Started working on a rear diffuser |
Awsome to see this continuing forward! We need a post with pics of the complete build so far! Exterior, Interior, Engine Bay etc! |
2 Attachment(s) Also made a rc body to match the wide body going on the car. Its not a ti, but it's the closest thing I could find. |
https://youtu.be/hdj2qlRzVSs Put a hood dump on the car because it was rubbing the lower hose and co workers were egging me on to put it on the 2 step, and one of them filmed it. |
Quote:
|
2 Attachment(s) Widebody time! |
Looking at the rear, it almost seems the rear bumper cover should be sectioned and widened... With so little "body" behind the rear wheels, the ti is tricky to do a wide body with. |
It's still sitting high in the rear in that picture. May have to remake the rear splitter depending on how it sits once the quarter panel is cut. It can probably drop 3-4in from that picture |
2 Attachment(s) Quarters cut and sitting down. Slightly tucking |
2 Attachment(s) Roll cage and body kit done |
2 Attachment(s) Couple drifting pics |
Are you still running drift events with this car? What rear suspension modifications are you running? I’ve heard about issues with snap oversteer stemming from the trailing arm geometry, wondering if it’s true and if so, what people do to counteract it. |
All times are GMT +1. The time now is 03:27 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org