CA - 1995 318 ti w DASC Charger -SOLD SOLD - SOLD - SOLD With so much sadness I have decided to part out my beloved 1995 318ti after a moron t-boned my son. He was texting while driving and hit my ti's passenger side. I had started parting it out and I am glad some of the sold parts went to another fellow enthusiast like myself (BlackBMWs). The car is mechanically good, there is no damage to the engine, suspension, transmission, differential, front and rear suspension. The hit damaged the frame of the car and that is why I have decided to part it out. The engine is a fully rebuilt engine with less than 18k miles. Drove it for 10k miles to break it in and install the DASC. DASC has less than 8k miles. The set up runs flawless., BlackBMWs saw the car running while we were parting it out. I have paperwork for the engine rebuild. The car went from this: http://i46.photobucket.com/albums/f1...psxj31f8a6.jpg http://i46.photobucket.com/albums/f1...ps07gpdam2.jpg http://i46.photobucket.com/albums/f1...psjnrvmgat.jpg to this: http://i46.photobucket.com/albums/f1...psgiqi213x.jpg The car was in superb conditions and the same applies to the parts the car has. I have changed pretty much everything you can imagine. This is your chance to get the parts you need and or this great engine+DASC setup. This is what is left so far: http://i46.photobucket.com/albums/f1...pseqa2nyuw.jpg http://i46.photobucket.com/albums/f1...ps5fxg4yas.jpg http://i46.photobucket.com/albums/f1...ps0ufpk8jo.jpg http://i46.photobucket.com/albums/f1...psf4d1mdxd.jpg http://i46.photobucket.com/albums/f1...pskphbgria.jpg http://i46.photobucket.com/albums/f1...psihardzah.jpg If you don't see it here just PM and I will let you know if I still have it and I will try to post prices later on today. |
What camber plates are those? |
CATuned coilovers with less then 500 miles on them. They come with adjustable camber plates. |
PM sent |
I was lucky enough to meet Diego and David yesterday. Sad to see such a nice TI go down. I managed a few parts. :biggrin: Don't know if it's sold yet, but there is a M42 with a DASC on it recently rebuilt on it. I have a video I will post later. I suspect it worked very well based on the fine rubber particles I found all over the rear bumper cover. :rockon: There is small case 3.45 LSC in the rear. I have Dibs on the suspension if the current deal falls through. :rolleyes: I smiled as their house was easy to find. I counted 4 E30's, 2 E46's (One an M3) and a sadly crushed TI. Great folks to deal with, long time Bimmerheads and their whole family drives them. One thing I noticed about how Diego and David built this car was a great attention to detail. All the right fasteners, every working surface clean in an immaculate garage. You'll be lucky if you meet them in person. I'll likely head back with my van again as I left a 7mm socket there. :eek: Rich :cool: |
Quote:
|
Quote:
Diego |
Quote:
Cheers! Rich BTW, folks, this M42 was recently rebuilt. Doing the quick math, the price I know Diego will set up for a local pickup is an insane deal considering DASC alone are going for a min $2500 and this and the motor are so clean and sounds smooth. If you are thinking M42 rebuild and DASC, consider yourself saving about $1500+ on this combination. I had the advantage of meeting them and seeing most of their cars. All clean and in shape. I'd encourage that if you are thinking about this setup in your car, this is already pre configured and just being broken in. I hope someone who can appreciate this setup gets it. If for a M44, I'd be all over it. :cool: |
Tempting... I have a '95 sedan this would drop right into. :smile: |
Hi There - Sorry to hear about your car - Rich told me about. I would like to get in line for the suspension as well. I would be curious about that engine set up. Rich helped tempt me on it... LOL! If possible, do you still have the side repeaters on the fenders? I would be interested in those as well if you have them as well as that rear seat bench (lower portion). Cheers, Michael |
Jerry or Michael, if either of you decide to get this, I'll drive down to Tracy and help get it uninstalled. I know Diego will drop the price if we pull it. Diego has a lift already. Most of the front is already off, so, we can drop the subframe, I'll remove MY suspension pieces, :biggrin:, and we load the motor and DASC in your vehicle. If neither of you guys want the tranny, I'll claim the flywheel, unless you all want to offer Diego for it. I have the same lightened M20 flywheel in my 318ic and it makes a noticeable difference over the dual mass one. Diego, once its removed, we can remove anything else of value then cut it up and call the metal recycler guys to pick it up. Cheers guys! :cool: |
318ti Engine and Dalton Atlanta Supercharger I'm interested in the engine plus the DASC supercharger. Please give me a price on the engine and DASC or a price for the car as it sits. Thanks, Bob |
Quote:
|
Quote:
As far as the suspension, Rich has first dibs on it. I do have the repeaters, they are clear and I do have the rear bench. I would have to sell it complete. It is in immaculate condition. Black leather. Diego |
Quote:
Let me know as soon as you can as I have a few other people interested. Rich, sounds like a plan. Diego |
All times are GMT +1. The time now is 01:10 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org