318ti.org forum (http://www.318ti.org/forum/index.php)
-   General Chit Chat (http://www.318ti.org/forum/forumdisplay.php?f=40)
-   -   new engine build. dasc + turbo +2kits nitrous + methanol (http://www.318ti.org/forum/showthread.php?t=42151)

andakn 04-03-2018 10:59 PM

3 Attachment(s)
The other reason for the extra ride height. And my new trans mounts I'm trying, they made it to st. Louis in 5 days from Poland.

ZEK 04-05-2018 04:32 AM

Is that with the m3 springs on? Also pretty cool trans mounts.


Sent from my iPhone using Tapatalk Pro

andakn 04-05-2018 04:42 PM

Had to put e46 m3 springs on to clear the fenders until I cut and put on the body kit. I drove it to work today and hopefully it gets warm enough to do some test hits at lunch.

andakn 04-06-2018 10:14 PM

1 Attachment(s)
Pic of the hot wheels car

ZEK 04-07-2018 01:18 AM

I like the stance. Are those stock e46 M3 spring?


Sent from my iPhone using Tapatalk Pro

andakn 04-07-2018 01:34 AM

Came off a e46 m3 convertible I put an h&r kit on. I save a bunch of weird parts that people don't want when they do upgrades. Also good exhaust parts, especially if its has nice mandrel bends. I don't know if you can see it in any of the pictures but the 2 pipes that come around my axles and diff are from a stock 335i muffler. They were nice 2.5in pipes that were mandrel bent Into an S shape, so I cut off the muffler and had them laying around. I wish that show junkyard wars was still around, I think I'd do well.

andakn 04-14-2018 03:34 AM

Broke the driveshaft first launch at the track. Time to explore other options.

ZEK 04-14-2018 04:54 PM

The Driveshaft shop should be able to help. In CF options as well.


Sent from my iPhone using Tapatalk Pro

andakn 04-14-2018 07:59 PM

I have looked into The Driveshaft Shop, and that is probably the route I'll go. Anyway, here's the video and pictures of the carnage
https://youtu.be/SQ5HeglYkhs

andakn 04-16-2018 05:34 PM

https://youtu.be/SQ5HeglYkhs
https://youtu.be/QEVuVOd21TY
One video of me breaking Paris, and one of my fastest laps in Nikki at autocross

andakn 04-21-2018 11:15 PM

1 Attachment(s)
I'm waiting on the new driveshaft but I have most of my new ECU stuff. Haltech 1500, HPI4 ignition, flex fuel sensor, multi fuel 1200cc injectors and twin 340lph fuel pumps. Also in light of the driveshaft breakage, I ordered a trans blanket and engine blanket, just in case, oh and a fire suit. They have me some flack about it at the track.

ZEK 04-22-2018 03:56 PM

Nikki seems extremely fast. Which driveshaft did you go with? I'm interested in how the standalone goes as I want to do that with mine.

andakn 04-23-2018 04:38 PM

https://youtu.be/wevyyfI9HEE
Video of yesterday's autocross event. I'm going with the chrome moly shaft from the driveshaft shop. Not sure when I'll start the ECU change, still need a few parts for the fuel system.

andakn 05-11-2018 03:33 PM

Ended up ordering the carbon fiber driveshaft, the shaft is too long to use chrome moly for the power and speed I'm going for. Downside is, it's the peak of racing season and there is a 5-7 week wait time. So I'm going to go ahead and start the process of installing the new ECU and fuel system.

ZEK 05-11-2018 03:48 PM

Dang that wait time isn't fun. Is it a one piece shaft? Nothing a local company could quick fab up just to get the car out? I know local friend gets his single piece e36 swap driveshafts made locally for around $150 each. Usually for LS swaps. The CF one will be very cool. Even less rotating weight.


All times are GMT +1. The time now is 11:44 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2020, 318ti.org