318ti.org forum (http://www.318ti.org/forum/index.php)
-   Exterior (http://www.318ti.org/forum/forumdisplay.php?f=22)
-   -   DIY Bumper re-paint (http://www.318ti.org/forum/showthread.php?t=40535)

stubear334 08-03-2014 11:24 PM

DIY Bumper re-paint
 
My bumpers have really bad sun burn & road rash (front only!). Any good DIY way to repaint them? A good body shop will want a $1,000 shake down. It seems like anybody shop repair starts at a grand these days. My car color is silver & the PO had the car repainted professionally, but left off the bumpers. Must have been an insurance thing after fender bender.

Stuart

jca 08-04-2014 01:04 AM

I went to Harbor Freight, bought an air compressor and a gravity feed, low pressure, paint gun and started painting. The equipment plus the paint and associated supplies should not run you over $300. Get some advice from the guy at the auto paint store and on the internet, take your time, and you should be fine. Good luck, John

stubear334 08-04-2014 03:39 AM

Hang on a minute. My friend lent me on a long-term loan, his Fuji HVLP 3 sprayer. This sucker cost a grand new. It came with a bottom feed gun, but I can buy a gravity fed gun pretty cheap, I think. Thanks for jostling that memory!

Stuart

zoner 08-04-2014 07:43 AM

For urethane bumpers, make sure you use an adhesion promoter and flex agent.


All times are GMT +1. The time now is 04:06 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org