|
Quote:
|
Used your write-up this week to fix my drivers side window. Went just as you described. Not sure if I'm more stoked about the rattle being gone or the window working properly! I'll keep you posted on how long it "stays" good. Thanks for putting in the time and sharing the knowledge man. |
No worries. I just fixed a friends M3/4 window a couple days ago. It's a little different than ours, but unfortunately I couldn't get it perfect since he used aftermarket parts. Glad everything worked out for ya, hope it lasts another 10 years without issues:wink: |
I didn't know this place existed. Im new to this and I've had the same problem on both windows of my 98 ti. Unfortunately, ive gone to a couple of shops already and to no avail- I still have the problem. CoolJess, thanks so much for putting this up. Im not too mechanically inclined. Im in Northern California- was wondering if you or anyone else on here is in my area (San Francisco Bay Area) who would be willing to help me do this or even point me to a reputable shop who has done this on Ti's- it would be greatly appreciated. Its been over 3 years since I've been able to drive with the window down. Im tired of driving with the sunroof open. :confused: Thanks in Advance. :biggrin: |
Gorilla glue worked for me, when I was rebuilding the door panel. but i`ll try weld next time, some of them did come off which sucked. |
I used clear epoxy and it's holding very well. |
I really want to do this soon because both of my windows are in need, they are completely dysfunctional and stuck all the way up and summer is here. I've just been waiting for those pics to help me out. Still waiting on those so whenever you get time those would be really helpful. Thanks again jess. |
sorry sokat, haven't had my door panels off since the "fix". I did a friend's e36 M3 sedan a few weeks back, but it looked a little different in there. I think Steven posted a link somewhere in this thread that had pics, but honestly it will probably be a while before I'm able to take mine apart again. I hurt my back the other day and I'm resting up. If you want, PM me your phone number and I'll walk you through it.. |
Thanks but I think ill be able to figure it out; its just that I think the last time I had my door panel off to temporary close the windows until I could fix them later, I noticed that when I pushed the ball on one of the regulator arms into the socket in the slider thing, it kept coming out. I think it may be broken so i was thinking of just getting all new sliders for both doors along with the metal clips. What do you think? Is my evaluation correct? and if yes should I get them from the local dealership or is there a better deal online somewhere? |
Quote:
|
Are the metal clips in place over the sliders? Sometimes they pop off and fall into the door. |
Quote:
I think I probably have all the clips but my main worry is that just one of the sockets in the slider may be broken. |
The clip definitely helps keep it in place, but the ball can still pop out even if the clip is installed. It has to, otherwise it would be ultimate destruction |
Quote:
|
All times are GMT +1. The time now is 02:53 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
Tutorial powered by GARS 2.1.8m ©2005-2006