Jean's Turbo Build - 318TTi well as some of u guys know i always wanted to turbo my lil TI but never really have some1 with a good tunning but now that johnboy is done with his turbo and running good im gonna get on this and start the turbo build, is not gonna be even close to what johnboy have but is good for me. gonna use the same OBX turbo manifold HKS SQV TIAL wastegate 44mm MITSUBISHI turbo T3 HKS turbo timer 27"x7"x2.5" intercooler delta fin 2.5" in/out. 2.5" intercooler piping Silicone hoses Heavy Duty Spring Loaded T-Bolt Clamps electronic boost controller (not sure what brand) Lucas 42.8# Blue Strip injectors Injector adaptors (Metric) M3 MAF sensor 2.5" > 3" boot to connect new MAF in system. Co2 intercooler sprayer (no tune) just to help with the heat soak on hot days or before/after a run on the track/street and all the other random stuff like the oil/water lines and everything else and im also gonna run with open wastegate, so is gonna be super loud (only WOT) lol :biggrin: is gonna take few months until i get all the parts, i already order some of the stuff tho, so maybe by winter or before we are gonna have another turbo TI :rolleyes: and im only gonna run 14psi tops and 8psi DD (shooting for 200+whp @14psi) cant wait for this to be done but money is kinda low, around 200month to spend on this so yeah is gonna take some time, any donations are welcome :wink: |
nice, can't wait to see it |
like your Ti isn't bad ass enough! this thing is gonna be awesome |
i know but we always need more and more power lol |
Quote:
I know where to get a excellent oil scavenger pump if you want one. I'm excited for you in a non-gay way |
Jean, Three things right off the batt and I might be telling you stuff you already know. 1. On the turbo make sure the exhaust is a standard 4 bolt. Mitsubishi turbo's have the TDO5 flange so you need to be sure the turbo has been converted to a standard 4 bolt unless your going to weld V-clamps and forget about matching bolt patterns... 2. On the OBX manifold. When you purchase the manifold make sure the down-pipe flange is standard 4 bolt or matches your turbo. The down pipe I received was 4 bolt but some flange size that no turbo shop could identify so I had to cut it off and weld on the correct flange. 3. I think you will need some 3" pipe for the turbo intake to air filter |
Items needed for tuning your car. 4 ~ Lucas 42.8# Blue Strip injectors 4 ~ Injector adaptors (Metric) 1 ~ 1995 ~ M3 or 328i MAF sensor 1 ~ 2.5" x 3" boot to connect new MAF in system. From the MAF to the throttle body it needs to be 3". The tuning for up to 20psi uses the 42.8# injectors and M3 MAF. BOV needs to be placed before the MAF so the BOV air is not metered You will need to pay Mark for the Firmware, I can do the DME work for free |
Jean, the car is going to be sick And John, I have to give you props again for being so incredibly willing to help everyone on this board and spread your knowledge to us:cool: |
@ john thanks for ur help on everything and ur right i totally forgot about the fuel system, injectors and MAF and i order the intercooler with 2.5" out, so im gonna have to buy adapter and some other stuff. also r u runing stock fuel pump, and fuel rail? whenever im about to buy the turbo and oil scavenger pump ill shoot u a pm how much u think would be for the injector, injectors adapters and the firmware, DME work? also thanks again for being so incredibly willing to help ;) |
The 2.5 x 3" hose is on Ebay. Injectors maybe $150 for the set or less. I've seen a set for $129 shipped Injector adaptors not sure but can't see more then $40 Firmware is a standard tune so I seriously doubt he will ding you on it, you could choose a TT stage 3 tune but it might be lean in the upper RPM. Yes I run a stock fuel pump but I'm most likely going to change to a bolt in Mustang GT version. You will be fine with stock fuel pump. Yes use stock fuel rail since the adapters will fit all EV style injectors to your rail & manifold. |
thanks again and again |
Just bought a set of injectors adapters from MM for $60... Good luck with the project!!! With John is not a matter of luck , since it will happen, but still... ehehe Be cerefull with CO2 spray: it might have the very unwanted side effect of having CO2 drwan into the air intake causing HP to dorp... |
Quote:
|
Quote:
|
2 Attachment(s) loook what i got on the mail today 27"x7"x2.5" :biggrin: |
All times are GMT +1. The time now is 07:30 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org