M42 adjusting pulley help after tensioner change 1995 318ti M42 112K Decided to replace my tensioner, along with some pullies, as the belt is a tad loose. No squealing except with rain, and, even then, only occasionally and only with the first start of the day. I replaced the tensioners and pullies with my old S52 M3 so I wasn't too worried about the process. http://www.realoem.com/bmw/showparts...89&hg=11&fg=18 I broke the 16mm bolt that holds the adjusting pulley (as opposed to the alternator pulley) as I thought it loosened clockwise. Ran to hardware store, got a replacement bolt (only with a 17mm head) and now I can not get the pulley to work as before. Tightened it clockwise, and when I push on it counter-clockwise to place the belt on it, the bolt just loosens. What am I doing wrong? I think I ate some bad kimchee last night and I can't think straight now. |
All times are GMT +1. The time now is 02:48 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org