Part number identity?
 

There are 4 hoses next to the ICV on my Ti that are cracked and need to be replaced. I found this out while replacing the 2 ICV hoses but in order to run the car I didn't touch the cracked ones and later on I looked in EPC- parts catalog but it was confusing and I was unable to find them in that software. I'll appreciate a little help from y'all. On the picture are visible only 3 of the hoses but actually they are 4. Thanks.
Attachment 2162


'95 318ti Auto m42

Those run to the injectors. All four come in one branch- or one part.

dam- my invoice is down state. I had this (and the other hoses) ordered, but never used it, so I returned it.

I'm digging around realoem but can find anything.
Find fuel injectors, and this should be near. Dealer can order it.

josh

thanx Josh, As you said, I looked for those hoses in fuel injection but it's confising man and i'm not sure.
I guess you are the only one in this entire forun that knows something about that and is willing to help. Thanks again

my guess is 13-53-1-739-618

http://www.realoem.com/bmw/partsearc...3&mospid=47505

no problem-
I'm down state for the weekend (she wants me back).
I have the invoice here, but nothing on it matches! I KNOW I Had his part. I'd call the dealer in ann arbor, but it's saturday- they'll have it on stock (my return).
Wierd this has my other hoses and M3 buper parts, but nothing for the part in question.
Sorry man- monday I'll find out for you. I may have it delivered/ shipped up north.

josh

I think you've got it Cali!

caliTI, thanks man, but the p/n you've given me is for the distribution piece and what I need are the hoses (p/n), not that piece man.

they don't show a pic of the distribution piece and it's linked to both diagrams that would possibly have this 4-hose piece so i'm thinking that's what they call it. could be wrong, but i guess you'll have to find out directly from a dealer then as there's no direct pic of it.

I pretty sure it's it, the $ is about right. It is basically the black plastic splitter which splices into 4 outlets, with 4 small hoses attached.

josh

Thank you Deadpan, thanks all of you guys. CaliTi, you're right at the first place. The only thing is it says it's for m44 engine and I got m42. Is it going to fit?

http://www.pelicanparts.com/BMW/cata...FULint_pg3.htm

I'm trying to find something to cross reference, but no luck. If they look similiar or nearly identical, you can always trim the hoses if to make them fit.....if they're too short, well.......maybe call Autohauz or dealer and see if they know.

realoem lists it for both m42 and m44. i did the original search for a 1995 m42 318ti.

I ordered it from Autohaus....I hope it'll fit. Does anybody know if it is hard to replace those hoses? I personally think that it should be easy job. Anybody to prove me wrong?

You'll have to remove the throttle body and maybe the upper half of the intake. Should be pretty obvious what may need to be removed as you get in there. Good luck.