M50 swap question
 

Hi guys (and gals)
I am currently amidst an m50 rebuild (for future forced induction build) and manual conversion into my 97 318ti. The only last thing I haven't been able to figure out properly, and the internet is lacking Info on, is this.

I am taking the entire loom, engine and gearbox out of donor 325is, taking the entire loom engine and gearbox of my 318ti, and installing the m50 into the ti. The only thing I am stuck on is the dash. Because of the multitude of different switches and controls between the cars,
Is it possible to just fit the entire dash from the 325 into the 318ti, or will an easier road be to work out all of the wiring, and rewire to fit the ti switches and knobs, etc. electronics isn't my strongest point and would feel far more comfortable straight swapping the dash over, but was wondering first and foremost if it was possible.

I will be starting a nice in depth build
Thread soon!!


Many regards in advance,
Nick from NZ