DASC Radiator Hose

[blefevre]

This question was asked a long time ago but got no responses. Does anyone know what radiator hose was shipped with the DASC, I would assume it is a hose from different car, I hope at least. I need one to get it installed.

[xxxJohnBoyxxx]

This question was asked a long time ago but got no responses. Does anyone know what radiator hose was shipped with the DASC, I would assume it is a hose from different car, I hope at least. I need one to get it installed.



Talk to denglish318ti. It's from a Ford truck I think. He purchased one in the US then had me mail it to him with some other parts.

I had the part number in PM but deleted it months ago

[denglish318ti]

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/raframecatalog.php?catalog=64&partnum=21673&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US :)

[blefevre]

Thank you! That was very helpful :)

[Trusted-1]

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/raframecatalog.php?catalog=64&partnum=21673&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US :)

The hose that was on the car my DASC came from had a Goodyear 61417 on it.

That crosses to a Gates part number 21623.

I can't say if the 21673 quoted above is correct but mine fits pretty well.

[m3nut]

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/raframecatalog.php?catalog=64&partnum=21673&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US :)

Dylan where in the Uk can I get that rad hose? I need it for the weekend:eek:

[tiFreak]

Dylan where in the Uk can I get that rad hose? I need it for the weekend:eek:

you'd probably have to get one imported from the states, the Aerostar was only sold in the US so they probably wouldn't bother stocking parts in the UK

[Trusted-1]

You might try searching for the part using the Goodyear or Gates part numbers since they may be used on other vehicles there too.

The part numbers I found were:
Goodyear 61417 or crosses to Gates 21623.

Good Luck

[m3nut]

Thank you for the info:wink:
I got it all fitted today and used the stock hose, but cut it down! Not the best, but got me going until I can get one from the states. Seen them at Rock Autos $11 but $40 to post:eek:

http://pic100.picturetrail.com/VOL760/2846297/20782066/383081893.jpg

[markrnorton]

Looking good

i suppose the UK contingent should really try and find a UK replacement part form the hose

[m3nut]

The hose that was on the car my DASC came from had a Goodyear 61417 on it.

That crosses to a Gates part number 21623.

I can't say if the 21673 quoted above is correct but mine fits pretty well.


Good news:smile: received the hose from rock auto's!
I ordered the gates 21623 and 21673. The later is the better fit.
The 21623 is a bit short and needs to be pulled out of shape to fit, but will be a good spare.
Thanks again guy's for the part numbers and links:wink:

[Trusted-1]

Good news:smile: received the hose from rock auto's!
I ordered the gates 21623 and 21673. The later is the better fit.
The 21623 is a bit short and needs to be pulled out of shape to fit, but will be a good spare.
Thanks again guy's for the part numbers and links:wink:

Thanks for confirming which is a better fit.

My kit was used and came with the 21623 so I may get the 21673 before I change the coolant again since it fits better.

Can you post a photo of what it looks like installed?

Thanks

[pdxmotorhead]

On a couple race cars I work on, I replaced the hose with a custom bent metal tube with rubber couplers.

Dave

[m3nut]

Thanks for confirming which is a better fit.

My kit was used and came with the 21623 so I may get the 21673 before I change the coolant again since it fits better.

Can you post a photo of what it looks like installed?

Thanks

Sorry it's taken a while!
http://pic100.picturetrail.com/VOL760/2846297/20782066/384517795.jpg
http://pic100.picturetrail.com/VOL760/2846297/20782066/384517798.jpg

[Trusted-1]

M3nut

Thanks for the photos.

I am auto crossing next weekend so I may try to swap to this style hose and change coolant before then.

The photos are very helpful.

Trusted-1